APC Back UPS BX625CIMS 325Watts 625va with AVR Universal Sockets

Product Specifications

• Brand: APC
• Model Number: BX625CI-MS
• Output Power Capacity: 325 Watts / 625 VA
• Max Configurable Power: 325 Watts / 0 VA
• Nominal Output Voltage: 230V
• Efficiency at Full Load: 65.3%
• Topology Standby
• Waveform Type Square wave
• Output Connections
• (3) Universal Receptacle (Battery Backup)
• Efficiency at Half Load: 75.8%
• Nominal Input Voltage: 230V
• Input Frequency: 45 - 65 Hz
• Input Connections
• IEC-320 C14
• Cord Length: 1.22 meters
• Input voltage range for main operations: 151 - 299V
• Maximum Input Current: 3A
• Type of Input Protection Required: 3-pole breaker
• Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof
• Included Battery Modules1
• Typical recharge time: 6 hour(s)
• Surge energy rating: 273 Joules
• Maximum Height: 278.00 mm
• Maximum Width: 160.00 mm
• Maximum Depth: 88.00 mm
• Net Weight: 5.00 KG
• Shipping Weight: 5.20 KG
• Shipping Height: 399.00 mm
• Shipping Width: 215.00 mm
• Shipping Depth: 128.00 mm
• Color: Black
• Operating Environment0 - 40 °C
• Operating Relative Humidity0 - 95%
• Storage Temperature-15 - 40 °C
• Storage Relative Humidity0 - 95%
• Audible noise at 1 meter from surface of unit45.00 dBA
• Features:
• Cold-start capable Provides temporary battery power when the utility power is out.
• Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Audible alarms Provides notification of changing utility power and UPS power conditions
• Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
• Overload protection Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.
• Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.
• Benefits:
• Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.
• Surge only outlets Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
• Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse.
• Audible alarms Provides notification of changing utility power and UPS power conditions
• LED status display Quickly understand unit and power status with visual indicators.
• Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.